115V 230V AC/DC PMDC Electric Motor Variable Low Speed

38 RPM Gear Motor 115V 230V Reversible Variable Speed

This is a compact, single-phase, 115v ac to 230v ac input, permanent magnet, BRUSHLESS gear motor

with reversible, on/off, speed adjustable controls. Speed range varies depending on the shaft load.

Motor's maximum speed is 38 RPM. Rotation is reversible by a signal wire. This combination will be

described in two parts: brushless dc gear motor and power adapter.

Brushless 12VDC Gear Motor: 8.4 N-m (6.2 ft-lb) torque at 35 RPM. Permanent magnet rotor. 60mm x

60mm square front. 4 M5 threaded holes located at front for face mounting. Motor length is 6.5 inch

(165mm) long and its controller is integrated as part of the motor. Shaft is 8mm in diameter with a flat

and is 1 inch (25.4mm) long. The control line, which contains speed adjustment (with a pot soldered

already), reversing signal wire, on/off signal wire, and signal ground wire, is 20 inch (508mm) long.

Connector line that is to connect to the power adapter is 20 inch (508mm) long. Motor control is very

simple. To turn the motor on, simply connect the on/off (blue) wire to signal ground (black) wire. A

typical practice is to introduce a switch between the on/off wire and the ground wire, but one may decide

to solder the on/off (blue) wire to the ground (black) wire if on/off feature is not necessary. To reverse the

rotation of the motor, simply connect the reverse (white) wire to the same ground wire and the motor will

reverse its rotation. PLEASE BE SURE THAT THE MOTOR IS AT FULL STOP BEFORE REVERSING.
To vary the speed, simply turn the potentiometer.

Power Adapter: The power cord is 5 ft(152 cm) long and has a standard plug ready to plug into a

standard appliance outlet. The adapter is able to universally accept 115v ac or 230v ac. Connector line

that is to connect to the motor is 3 ft (91 cm) long. Adapter's dimensions are 2.5 in(64mm) width by

4.75in(121mm) length by 1.75in(44mm) depth.

Manufacturer: Wondermotor; UME

To wholesale or OEM buyers: we can build a motor based on your specifications for your high-quantity

demand.