Scott Gross Store
Shopping Cart
# of Item(s): 0
Total: $0.00

ESAB Dual Shield II 100 Wire - .045" - 33 lb PSP VP - 245013636

ESAB Dual Shield II 100 Wire - .045" - 33 lb PSP VP - 245013636

Manufacturer: ESAB®
SKU: ESA245013636
Price: $216.40
Order Now

Quantity:


ESAB Dual Shield II 100 Wire - .045" - 33 lb PSP VP - 245013636

Dual Shield II 100 is an all-position flux cored electrode that combines a high strength deposit with excellent impact toughness and low diffusible hydrogen levels. The rutile basic slag system produces a smooth spray-like transfer with reduced spatter and low post weld cleanup. Dual Shield II 100 is designed to join high strength steels such as HY-80 and T-1 in the as welded or stress relieved condition using a 75% Ar / 25% CO2 shielding gas. It is especially well suited for high tensile steels that are used in sub-zero temperatures. The weld metal analysis is similar to an E10018-M low hydrogen electrode.

Shielding Gas

75% Argon/25% CO2


  • Classifications/Approvals

    • ASME SFA 5.29
    • AWS A5.29; E101T1-K3MH4


Depositions/Parameters:

Diameter Amps Volts Wire Feed Speed Deposition Rate Efficiency
.035 in, 0.9 mm 130 A A 22 288 ipm, 732 cm/min 3.2 lbs./hr., 1.45 kg./hr. 85 %
150 A A 25 384 ipm, 975 cm/min 4.3 lbs./hr., 1.95 kg./hr. 85 %
200 A A 27 576 ipm, 1463 cm/min 6.5 lbs./hr., 2.95 kg./hr. 85 %
250 A A 30 784 ipm, 1991 cm/min 8.9 lbs./hr., 4.04 kg./hr. 86 %
.045 in, 1.2 mm 150 A A 28 200 ipm, 508 cm/min 4.2 lbs./hr., 1.91 kg./hr. 86 %
210 A A 29 300 ipm, 762 cm/min 6.3 lbs./hr., 2.86 kg./hr. 86 %
250 A A 30 400 ipm, 1016 cm/min 8.5 lbs./hr., 3.86 kg./hr. 87 %
290 A A 33 500 ipm, 1270 cm/min 10.7 lbs./hr., 4.85 kg./hr. 87 %
330 A A 34 600 ipm, 1524 cm/min 12.7 lbs./hr., 5.76 kg./hr. 87 %
.052 in, 1.4 mm 155 A A 25 150 ipm, 381 cm/min 4.4 lbs./hr., 2 kg./hr. 87 %
245 A A 28 250 ipm, 635 cm/min 7.3 lbs./hr., 3.31 kg./hr. 86 %
310 A A 33 350 ipm, 889 cm/min 10.2 lbs./hr., 4.63 kg./hr. 85 %
360 A A 36 450 ipm, 1143 cm/min 13.3 lbs./hr., 6.03 kg./hr. 85 %
430 A A 37 600 ipm, 1524 cm/min 17.6 lbs./hr., 7.98 kg./hr. 87 %
1/16 in, 1.6 mm 190 A A 27 150 ipm, 38 cm/min 6.1 lbs./hr., 2.77 kg./hr. 87 %
300 A A 30 250 ipm, 635 cm/min 10.2 lbs./hr., 4.63 kg./hr. 87 %
365 A A 33 300 ipm, 762 cm/min 12.3 lbs./hr., 5.58 kg./hr. 86 %
410 A A 33 350 ipm, 889 cm/min 14 lbs./hr., 6.35 kg./hr. 88 %
450 A A 33 400 ipm, 1016 cm/min 16.1 lbs./hr., 7.3 kg./hr. 87 %
500 A A 39 500 ipm, 1270 cm/min 20.1 lbs./hr., 9.11 kg./hr. 87 %
5/64 in, 2.0 mm 250 A A 26 112 ipm, 284 cm/min 6.4 lbs./hr., 2.9 kg./hr. 85 %
350 A A 28 176 ipm, 447 cm/min 10.5 lbs./hr., 4.76 kg./hr. 85 %
450 A A 31 258 ipm, 655 cm/min 14.8 lbs./hr., 6.71 kg./hr. 85 %
3/32 in, 2.4 mm 350 A A 30 124 ipm, 315 cm/min 9.6 lbs./hr., 4.35 kg./hr. 84 %
400 A A 30 166 ipm, 422 cm/min 12.7 lbs./hr., 5.76 kg./hr. 85 %
450 A A 31 197 ipm, 500 cm/min 15 lbs./hr., 6.8 kg./hr. 86 %
500 A A 32 237 ipm, 602 cm/min 18.5 lbs./hr., 8.39 kg./hr. 86 %
550 A A 34 278 ipm, 706 cm/min 21.3 lbs./hr., 9.66 kg./hr. 88 %
7/64 in, 2.8 mm 550 A A 30 140 ipm, 356 cm/min 17.1 lbs./hr., 7.76 kg./hr. 85 %
625 A A 34 161 ipm, 409 cm/min 19.6 lbs./hr., 8.89 kg./hr. 86 %
700 A A 36 190 ipm, 483 cm/min 23 lbs./hr., 10.43 kg./hr. 86 %
1/8 in, 3.2 mm 600 A A 32 111 ipm, 282 cm/min 16.2 lbs./hr., 7.35 kg./hr. 86 %
725 A A 34 153 ipm, 389 cm/min 22.5 lbs./hr., 10.21 kg./hr. 86 %
850 A A 38 194 ipm, 93 cm/min 29.2 lbs./hr., 13.25 kg./hr. 85 %


Properties:

As Welded 75% Ar / 25% CO2  
Yield Strength 101 ksi, 700 MPa
Tensile Strength 109 ksi, 755 MPa
Reduction in Area 60 %
Elongation in 2" 21 %
Stress Relieved 1 hr. @ 1050ºF (566ºC) 75% Ar / 25% CO2  
Yield Strength 99 ksi, 685 MPa
Tensile Strength 110 ksi, 760 MPa
Reduction in Area 61 %
Elongation in 2" 22 %
Typical Charpy V-Notch Impact Properties  
Testing Temperature 0ºF (-18ºC)  
As Welded 75% Ar / 25% CO2 48 ft.-lbs., 65 J
Stress Relieved 1 hr. @ 1050ºF (566ºC) 75% Ar / 25% CO2 33 ft.-lbs., 45 J
Testing Temperature -20ºF (-29ºC)  
As Welded 75% Ar / 25% CO2 40 ft.-lbs., 54 J
Stress Relieved 1 hr. @ 1050ºF (566ºC) 75% Ar / 25% CO2 30 ft.-lbs., 41 J
Testing Temperature -40ºF (-40ºC)  
As Welded 75% Ar / 25% CO2 32 ft.-lbs., 43 J
Testing Temperature -60ºF (-51ºC)  
As Welded 75% Ar / 25% CO2 28 ft.-lbs., 38 J
Typical Undiluted Weld Metal Analysis  
75% Ar / 25% CO2  
C 0.05 %
Mn 1.45 %
Si .44 %
P .012 %
S .010 %
Ni 1.70 %
Mo 0.40 %


Surcharges may apply. Surcharges are billed separately!
Please call for a quote unless you agree to current market surcharges!

E-mail a friend about this item.



Return to Catalog