|
|
|
 |
ESAB CoreShield 8 Wire - .072" - 20 lb AWS - 242206134
|
Manufacturer:
ESAB® | | SKU: |
ESA242206134
|
Price: $88.54
Order Now
|
ESAB CoreShield 8 Wire - .072" - 20 lb AWS - 242206134
Superior mechanical properties and X-ray quality welds
- Wide range of welding parameters
- All positions under a wide range of heat input
- Improved efficiencies and productivity
- Fast-freezing slag system
- Faster travel speeds
- Excellent arc and puddle control in vertical-up weld applications
- Straight progression is preferred
- Excellent slag removal
- No external shielded gases needed
- Very smooth and even weld bead
- DCEN (electrode negative)
- For use in fillets, open root gaps, fill and cover passes
Procedure Coreshield 8 contains very low levels of barium. The TLV for barium will not be reached before the total welding fume limit of 5 mg/m3 is reached. The fumes and slag dust, however, can be irritating and care should be taken to keep these out of the welder's breathing zone. Consult MSDS for more information.
-
Classifications/Approvals - A.B.S.- 3SA,3YSA(H10)
- D.N.V.- III YMS(H10)
- AWS A5.20; E71T-8
- DEUTSCHE BAHN
- L.R.- 3S,3YS(H10)
- CERTIFIED BY C.W.B.- CSA W48
- B.V.- S3YM(HH)
- TUV
- ASME SFA 5.20
Depositions/Parameters: | 1/16 in, 1.6 mm | 155 A | 21 | 150 ipm, 381 cm/min | 4.16 lbs./hr., 1.9 kg./hr. | 78.6 % | 1/2 inches, 12.7 mm | | 180 A | 22 | 185 ipm, 470 cm/min | 5.14 lbs./hr., 2.3 kg./hr. | 79.6 % | 1/2 inches, 12.7 mm | | 205 A | 24 | 240 ipm, 610 cm/min | 6.60 lbs./hr., 3.0 kg./hr. | 78.2 % | 1/2 inches, 12.7 mm | | 220 A | 25 | 275 ipm, 698 cm/min | 7.53 lbs./hr., 3.4 kg./hr. | 78.9 % | 1/2 inches, 12.7 mm | | 240 A | 25 | 300 ipm, 762 cm/min | 8.21 lbs./hr., 3.7 kg./hr. | 79.2 % | 1/2 inches, 12.7 mm | | 0.072 in, 1.8 mm | 200 A | 21 | 160 ipm, 406 cm/min | 6.13 lbs./hr., 2.8 kg./hr. | 79.4 % | 1/2 inches, 12.7 mm | | 225 A | 21 | 190 ipm, 483 cm/min | 7.32 lbs./hr., 3.3 kg./hr. | 80.3 % | 1/2 inches, 12.7 mm | | 255 A | 23 | 230 ipm, 584 cm/min | 8.99 lbs./hr., 4.0 kg./hr. | 80.2 % | 1/2 inches, 12.7 mm | | 275 A | 24 | 260 ipm, 660 cm/min | 10.19 lbs./hr., 4.6 kg./hr. | 80.9 % | 1/2 inches, 12.7 mm | | 290 A | 25 | 280 ipm, 711 cm/min | 11.00 lbs./hr., 4.9 kg./hr. | 80.5 % | 3/4 inches, 19.05 mm | | 5/64 in, 2.0 mm | 150 A | 21 | 90 ipm, 229 cm/min | 3.96 lbs./hr., 1.8 kg./hr. | 80.6 % | 3/4 inches, 19.05 mm | | 175 A | 22 | 110 ipm, 279 cm/min | 4.83 lbs./hr., 2.2 kg./hr. | 80.9 % | 3/4 inches, 19.05 mm | | 200 A | 23 | 135 ipm, 343 cm/min | 5.93 lbs./hr., 2.7 kg./hr. | 80.4 % | 3/4 inches, 19.05 mm | | 320 A | 24 | 240 ipm, 610 cm/min | 10.53 lbs./hr., 4.7 kg./hr. | 81.0 % | |
Seismic Data:
| | Size - 5/64 in | | Shielding Gas - N/A | | Heat Input Range | High 78-85 kJ/in | Low 25-32 kJ/in | | Position | 3G | 1G | | Heat Input | 84.8 kJ/in | 31.1 kJ/in | | Current | 250 amps | 305 amps | | WFS | 145 in/min | 190 in/min | | Voltage | 21.9 volts | 23.5 volts | | Travel Speed | 3.9 in/min | 13.8 in/min | | Pass/Layer | 2F, 3S | 1F, 1S, 1T, 3Q | | Tensile | 82.8 ksi | 87.7 ksi | | Yield | 68.1 ksi | 73.5 ksi | | Elongation | 22% | 27% | | Impact Temperature | 70°F | 70°F | | Impact Results (ft-lbs) | 73, 76, 73, 71, 72 | 68, 65, 59, 69, 68 | | Minimum Required | 40 | 40 | | Average Impact | 73 ft-lbs | 68 ft-lbs | | Impact Temerature* | 0°F | 0°F | | Impact Results (ft-lbs) | 43, 37, 37 | 45, 34, 35 | | Average Impact | 39 ft-lbs | 41 ft-lbs |
Properties:
| As Welded | | | Yield Strength | 67 ksi, 465 MPa | | Tensile Strength | 82 ksi, 565 MPa | | Elongation in 2" | 24 % | | Typical Charpy V-Notch Impact Properties | | | Testing Temperature -20ºF (-29ºC) | 30 ft.-lbs., 41 J | | Testing Temperature 40ºF (4ºC) | 65 ft.-lbs., 85 J | | Typical Undiluted Weld Metal Analysis | | | C | 0.17 % | | Mn | 0.5 % | | Si | 0.1 % | | P | 0.010 % | | S | 0.003 % | | Al | 0.5 % |
Surcharges may apply. Surcharges are billed separately!
Please call for a quote unless you agree to current market surcharges!
E-mail a friend about this item.
Return to Catalog
|
Sign In
