The HD-27XA is a four-post runway style extended alignment lift designed for full size commercial vehicles.
27,000 pound lifting capacity Runways include rail-kit for optional accessories Electric/hydraulic power system Single 5” diameter hydraulic cylinder mounted underneath runway Internal “Anti-Sway’ slider blocks in each column Optional drive-thru ramps available Optional 30" ramp extensions available Runways include rail-kit for optional accessories Features heavy-duty aircraft cableOversized self-lubricating cable sheaves Rugged 4” main sheave axles Multi-position safety locks in each column Multi-position, adjustable height safety locks in each column Ramps feature non-skid surface Push-button safety release Runways adjust for different tread widths Optional drive-thru ramps available Optional runway extensions are available Optional 9K, 12K, 15K-pound capacity rolling jacks available This heavy-duty four-post lift brings safety, durability and ruggedness to a whole new level. A commercial-grade lift that is second to none and built to last.
The long list of design features include:
Dependable design - four heavy-duty high quality stainless steel lifting cables and a single hydraulic cylinder mounted underneath the runway makes this lift the most durable, maintenance-free lifting system on the market.
12” diameter cable sheaves – maybe they are a tad bit on the large size but these super size sheaves will add years of service life to the lifting cables. The larger the sheaves, the longer the life of the cables.
Multi-level locking positions - each lift is equipped with multiple adjustable height locking positions for multi-height parking. A convenient push-button pneumatic safety lock control releases all four independent safety locks simultaneously.
Heavy duty aircraft cable - each lift is supplied with four high quality stainless steel lifting cables rated at 26,000 pounds each. All lifting cables are fully enclosed within lift structure.
Electric/hydraulic power system - each lift is designed using a maintenance-free electric hydraulic power system for ultimate dependability. All controls are conveniently located within easy reach.
Large baseplates - 12” x 12” base plates provide solid stability.
Single hydraulic cylinder - each lift is equipped with a single 5” diameter hydraulic cylinder hidden away under the runway for maximum performance and reliability and minimum exposure to elements. Our industrial-grade hydraulic cylinders feature a one-piece, pilot fitted, machined steel piston wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands that virtually eliminates any fluid bypass. The micro-smooth chrome-rod is machined from high yield, ground & polished C-1045/50 micro-alloy steel and plated to a minimum of .001? diametrically, to ensure superior cylinder operation and life. Specially designed, high durometer, mechanically loaded rod seals virtually eliminate rod seal leakage and a specially formulated abrasion resistant urethane rod wiper provides exclusion protection. The welded cylinder body is made from high yield-strength steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures straight, smooth and long duty life cylinders. An integrated flow restrictor provides a controlled descent in the case of an unexpected hose rupture.
Durable Powder Coat Finish – All HD-Series lifts feature a durable powder coat finish that gives the metal a high-quality, extremely durable finish which can withstand even the harshest environmental or chemical conditions. Unlike other companies that claim to powder coat, we take pride in our meticulous 10-step process. First, all parts are visually inspected then sandblasted. After, the parts are washed in our five-stage phosphate tanks that can accommodate parts up to 25’ long. Once cleaned, they’re immediately dried, to avoid rust production then outgassed. Outgassing is a process we take pride in which pre-bakes the parts in a curing oven, reducing the possibility of blemishes that may be hiding in the pores of the metal. If not properly outgassed, imperfections in the metal may bubble during the curing process and most likely cause chips in the powder. After the parts are washed and outgassed, any surfaces and/or threaded holes that need to be masked or plugged are done so with high-temperature masking tape and silicone plugs. Next, the parts are given a quick thinner wipe to remove any light debris or fingerprints then hung on an electrostatically grounded conveyor line. The powder is then applied using an electrostatic spray gun. The powder “sticks” to the parts similar to how dust sticks to a television screen. Once the parts are powder coated, the carts are rolled into our curing oven and baked at 400 degrees for 15 for 45 minutes.
Integrated design - lifting cables, airlines, safety latches and sheaves are all fully enclosed.
Non-skid runways – sure grip even when the runway surface is wet or oily.
Longer approach ramps - these approach ramps were designed a little longer to help when loading low ground clearance vehicles. A little bit that makes a big difference. Automatic safety locks - aircraft-quality stainless steel and aluminum pneumatic cylinders release all four locks simultaneously with the simple push of a button. The spring-loaded safety locks automatically engage continuously when raising the lift. For added safety a secondary lock system acts as a slack-cable device automatically engaging in the event of an unexpected cable failure. Lifting cables,airlines, safety latches and sheaves are all fully enclosed within lift structure.
runways
| Model | HD-27XA |
| Style | Heavy-Duty Alignment |
| Lifting Capacity | 27,000lbs. / 12247 kg. |
| Lifting Height | 76" / 1930 mm |
| Lifting Time | 120 Seconds |
| Overall Length (Including Approach Ramps) | 357" / 9068 mm |
| Overall Runway Length | 321" / 8153 mm |
| Overall Width | 144" / 3658 mm |
| Runway Width | 20" / 508 mm |
| Runway Height | 10-1/4" / 260 mm |
| Width Between Posts | 125" / 3175 mm |
| Minimum Four-Wheel Alignment (*) | 83" / 2108 mm |
| Maximum Four-Wheel Alignment (*) | 138" / 3505 mm |
| Maximum Two-Wheel Alignment (*) | 271" / 6883 mm |
| Typical Service Wheelbase Maximum (*) | 305" / 7747 mm |
| Motor(**) | 220 VAC / 60 Hz. / 1 Ph. |
CALL (800) 637-4027 FOR THE GUARANTEED LOWEST PRICE ONLINE!
Service :
Policies :
About Us :
View Cart : Checkout
: Home
