SKU: EPS24PSB

EZ LIMITED FINISHING PREP STATION

. • EZ TO INSTALL

. • EZ TO OPERATE

. • EZ TO MAINTAIN

. • EZ TO ADD HEAT

DESCRIPTION

The EZ Limited Finishing Prep Station draws fresh air from the cleaner upper levels of the shop through a pressurization fan. This air is forced down into the prep station through a filter bank located in the ceiling near the entry. The air is drawn through the prep station work area into a filtered exhaust plenum at the opposite end and exhausted out to the atmosphere through the exhaust fan and stack.

This design allows for easy addition of a heated air makeup unit.

LIGHTING FEATURES

Bright full booth illumination is provided by eight (8) four-tube, 48" long, 32-watt, fluorescent light fixtures in the ceiling panels. Each is sealed behind clear tempered safety glass. All fixtures are UL listed and approved for their intended use and placement. The light tubes are not furnished with the fixtures.

CONSTRUCTION FEATURES AND QUALITY STANDARDS

The Hanging Intake Plenum and Exhaust Plenum Wall will be fabricated with 18-gauge galvanized steel panels; flanged for strength and pre-punched for easy nut and bolt assembly. The intake plenum may be suspended with a maximum of 10' tall clearance or as low as 7' tall clearance. The actual installed height is required to order the Goff’s™ Curtain walls.

Intake air is supplied by one (1) 18" diameter tubeaxial fan with a 11/2 HP, three-phase motor. Exhaust is provided by one (1) 18" diameter tubeaxial fan with a 11/2 HP, three-phase motor.

Panels, assembly hardware, filters, and sealants needed for mechanical installation are included. The threaded rod for suspending the intake plenum is not supplied by us. Curtain walls, intake and exhaust stack, control panel, and other electrical components may be purchased separately.

Interior Dimensions 14’ Wide X 10’ High X 24’ Long

Includes 8 Lights

Priced As Shown with Curtains and Powder Coating!

Colmet